Mercury Rubbe Mills

ELEVATOR BELTING QUESTIONNAIRE

Elevator length, feet or meters.

Belt width in. or mm.

Angle of elevation

Power rating of drive motor

Speed of belt, feet per minute or meters per second

Weight of material to be elevated per hour

Quantity per minute in periods of peak loads
(maximum amount of material on belt at any one time if possible)

Name of material elevated. Are pieces particularly sharp ?

Weight of material in lbs per cu. ft. or tones per cu. m.

10.

Is material fine, lumps or mixed ? (State size of largest piece.)

State of material, hot or cold (State Temperature) wert or oily , etc

Details of condition. i.e fumes, excessive moisture etc. State whether indoor or out door situation

Size, capacity and weight of one bucket

Distance between buckets. Are buckets space or continuous ?

Total number of buckets on belt

Projection of buckets from belt face, inches or mm.

Diameter and face width of pulleys :

Are pulleys lagged ?

Method of feed

Method of attaching buckets to belt

Weight of Boot pulley.

Email:

Profile

Cover Grade